Skip to content

Fiber Optic EPO-TEK 353nd Epoxy Utility AB Glue

EPO-TEK® 353nd Epoxy is a two component, high temperature epoxy designed for semiconductor, hybrid, fiber optic, and medical applications. It is one of the most popular EPO-TEK® brand products, and is known throughout the world for its performance and reliability. Also available in single component frozen syringe.

SKU: 75845632 Category:

Fiber Optic EPO-TEK 353nd Epoxy Utility AB Glue

Model: 353nd Epoxy

 

Product Description:
1. EPO-TEK® 353nd Epoxy is a two component, high temperature epoxy designed for semiconductor, hybrid, fiber optic, and medical
applications. It is one of the most popular EPO-TEK® brand products, and is known throughout the world for its performance and
reliability. Also available in single component frozen syringe.

 
2. Storage of 353nd Epoxy, 353ND PartA & B requires storage at room temperature when not mixed, without refrigeration. If is stored below 0 ° C, it must be warmed at room temperature for at least 3-4 hours before A & B mixing. This process is to prevent moisture from generating moisture in Epoxy and to avoid bubbles when the material solidifies.
3. 353ND Part A & B mixing process * As 353ND Part A & B is packed in 4g A-Pack plastic bag, A & B components have been divided according to proportion The shaft is squeezed vigorously from the end of component A to allow the resin to move towards the seal of component B. B /. Press hard so that the resin can break through the interlayer. C /. Then fix the end of the plastic bag and run the resin from beginning to end until the components A and B are completely until it is mixed. D /. Cut the end of the plastic bag and extrude the 353ND that has been mixed to apply. * Such as 353ND Part A & B packaging is a large-volume packaging (such as tin cans, plastic bottles or glass bottles, etc.), first, shake parts A and B separately, then take PartA 10 parts and 1 part 1 Place in glassware and mix well. If a large amount of bubbles are found after mixing, should go through the defoaming procedure before being applied. There are two types of deaeration methods: vacuum deaeration and centrifugal deaeration.
4. 353nd Epoxy can be used after mixing (Pot Life) and the amount of 353ND can be used for 4 hours after mixing, so the amount should be controlled so that the resin technology performance index is the best. Because after mixing all the epoxy resins, if it exceeds the usable time its viscosity will change and affect the adhesion. Epoxy Technology Inc. It is recommended that the dosage of should not exceed 25g each time. 4. Epoxy Technology Inc. The curing time following the curing time and temperature data for user reference 60 ℃ 1.5 hours 80 ℃ 15 minutes 100 ℃ 5 minutes 120 ℃ 2 minutes 353ND 150 ℃ 1 minutes curing at 150 deg.] C or where The curing starts at 200 seconds for the first 10 seconds, so the additional curing temperature and time provided above are for reference only, and at the same time, it also generates some heat during curing. Under normal circumstances, it is not recommended to cure at a temperature above 150 ℃, preferably at 150 ℃ for 1 minute or at 80 ℃ for 15 minutes.
Application
1) Epo-tek 353nd Epoxy is a two-component epoxy resin with solid content of 100%.The resin can resist the dissolution and erosion of various solvents and chemicals. It is an ideal adhesive for optical fiber, metal, glass, ceramics and most plastics Adhesive for.
2) The unique characteristics of epo-tek 353nd are: 1. Long operation time; 2. Easy operation; 3. Easy to penetrate into optical fiber bundle; 4. Amber becomes dark red during curing, which helps to determine whether it is fully cured through color rather than time; 5. Low skin allergy. 3) EPO-TEK 353ND is suitable for use in thin films and slightly thick films. When it is needed for thicker applications, it is best to gel at room temperature and slightly above room temperature, then increase the temperature and then solidify in a short time.
Model Number
353ND
Use mixing ratio
10: 1
Applications
Fiber Optic Connector
Volume
1LB
Shelf life
1 year
Applications
 Fiber Optic Connector
Packing specification
Group A + Group B
 MOQ
 1 set

Reviews

There are no reviews yet.

Be the first to review “Fiber Optic EPO-TEK 353nd Epoxy Utility AB Glue”

Your email address will not be published. Required fields are marked *

en_USEnglish